Polymer standard knife

Standad polymer - stainless steel knife (sublimation printing)

Availability: 215 pcs Available

1,48 € tax not incl. 1,79 € incl. tax

More info
Send to a friend
Send question

STANDARD POLYMER - STAINLESS STEEL KNIFE

Polymer handle, stainless steel cutlery
Stainless steel AISI 304 so-called food grade stainless steel
SGS certificate - conformity with FDA

DIMENSIONS - WEIGHT

FULL CUTLERY
Length 185 mm / width 25 mm / 7.5 mm thickness

PRINTABLE POLYMER HANDLE
Length 101 mm / width 12,5 - 19 mm

Weight: 36g
Dimensions (area) of the image for printing on a T-shirt press approx. 92 x 8 - 13 mm
Dimensions (area) of the image for printing in 3D / oven 96 x 10 - 16 mm

PACKAGING

Cutlery is sold individually
The individual cutlery is packed in a PE bag
Larger package of 10 pcs

PRINT - TEMPERATURES - TIMES

CLASSICAL MUG PRESS
Set temperature 180 C / time 240 sec

Use a special jig that can print all 3 cutlery at once (print template available).
When printing, place the cutlery with the jigt in the middle of the press and cover it with a thin silicone.
If your T-shirt press does not allow greater vertical adjustment, remove the lower thick rubber from the press, which is about the same thickness as the jig, place the jig as shown (cutlery outwards) and place the second jig on the other side so that the upper heating plate does not tilt, ie that the press plate fits with the plane of the printed cutlery
See whole procedure, including pictures, at the description "Standard cutlery jig"

3D OVEN / ST3042
Switch on lower and upper heating 180 C / 10 min

It is easiest to print Cutlery in a shrink bag 2.8 x 11cm.
Fix the images on both sides of handle and place the whole in a shrink bag and then in the 3D / oven.
This way, cutlery can be printed on both sides.